MOTS-c Research Peptide — Purity, COA & Batch Data
MOTS-c is a sixteen-residue peptide encoded within the mitochondrial 12S rRNA gene. Two of its residues — methionine and tryptophan — are the ones that oxidise, and that is where most of the analytical attention on this compound belongs.
The MOTS-c peptide is sixteen residues, long enough that the mass is easy to confirm and hard to keep true. Oxidation adds 16 Da per affected residue, so a partly oxidised lot still looks like a single clean peak on a method that does not resolve the oxidised form — and the mass has already moved.
Compound identity
| Sequence (one-letter) | MRWQEMGYIFYPRKLR |
| Sequence (three-letter) | Met-Arg-Trp-Gln-Glu-Met-Gly-Tyr-Ile-Phe-Tyr-Pro-Arg-Lys-Leu-Arg |
| Chain length | 16 amino acids, linear |
| Molecular formula | C101H152N28O22S2 |
| Molecular weight | 2,174.62 g/mol |
| CAS registry | 1627580-64-6 |
| Oxidation-sensitive residues | Two methionines and two tryptophans; +16 Da per oxidised site |
| Supplied form | Lyophilised white powder, acetate salt |
Watch the +16. A lot reported at 2,190 or 2,206 is not a different peptide — it is the same sequence carrying one or two oxygen atoms. That is a storage finding, not a synthesis finding, and it should change how the material is handled rather than whether it is accepted.
What the name refers to
MOTS-c stands for mitochondrial open reading frame of the 12S rRNA, type c. The sequence is encoded inside the mitochondrial genome rather than in the nucleus, which is the reason the compound is grouped with the mitopeptides in the literature. For purchasing, the practical consequence is that the name circulates with variants: some listings describe a 16-residue sequence, others quote the same name against a shorter fragment or a modified analogue. The registry entry 1627580-64-6 corresponds to the 16-residue sequence above, so a lot claiming that CAS while reporting a mass below 2,000 is describing something else.
How MOTS-c identity is confirmed lot by lot
The MOTS-c sequence is sixteen residues with two methionines and two tryptophans. The theoretical mass is 2,174.62 and the multiply charged envelope is the practical confirmation route; the certificate should state a deconvoluted mass so the number can be read without reconstructing charge states. Anything reported at +16 increments points to oxidation rather than to a synthesis error.
The second check is the oxidation state at release, not only at synthesis. A lot can leave the facility at the theoretical mass and arrive heavier after a warm transit. Where the certificate is issued before shipping, the shipping condition is part of the identity record.
- Deconvoluted mass at 2,174.62 with the method stated.
- Oxidised forms resolved or at least quantified on the trace.
- HPLC purity by peak area with the chromatogram attached.
- Shipping condition recorded against the release date.
Purity, impurities and what the COA should show
MOTS-c purity is dominated by oxidation, and a generic purity figure hides it well: the oxidised peptide often elutes just before the parent, so a short run integrates them together and reports a single clean peak.
Methionine and tryptophan oxidation
Each oxidation adds 16 Da. The mono-oxidised form is the first to appear and is usually the largest impurity in a stored lot; the di-oxidised form follows. A method summary that states the run time and gradient lets a buyer judge whether those forms were separated or merged into the main peak.
Truncation and counter-ion
Deletion sequences from a sixteen-residue synthesis are the other impurity family, and they shift mass by whole residues rather than by 16 Da, so they are distinguishable from oxidation once a deconvoluted mass is stated. Counter-ions shift the weighed mass without touching the peptide.
- Purity by HPLC with the trace, on a run long enough to resolve oxidised forms.
- Deconvoluted mass against 2,174.62.
- Oxidised content quantified rather than omitted.
- Fill and appearance on the same lot.
- Shipping condition and release date recorded together.
Reconstitution and storage for laboratory stock
MOTS-c dissolves in water and in neutral buffer. The handling priority is oxygen: displace headspace with inert gas where the equipment allows, aliquot on the first day, and accept that a thawed aliquot has a shorter working life than the certificate implies.
| Solvent | Sterile water or neutral buffer, degassed where possible |
| Working stock | 1–2 mg/mL |
| Oxygen | Inert-gas headspace; avoid prolonged stirring which introduces air |
| Aliquoting | Single-use aliquots at −20 °C, frozen quickly |
| Light | Amber vial; tryptophan is the light-sensitive residue here |
| Powder storage | −20 °C under desiccation; consider −80 °C for long holds |
Freeze fast, thaw once.
Ordering MOTS-c: pack sizes and batch documents
Held as ten-vial kits in three fills. The MOTS-c COA for each lot states the deconvoluted mass and the oxidation finding, because a purity percentage alone would not show it.
| Pack | Format | Price |
|---|---|---|
| 10 mg × 10 vials | 10-vial kit | $60 |
| 20 mg × 10 vials | 10-vial kit | $100 |
| 40 mg × 10 vials | 10-vial kit | $200 |
A MOTS-c supplier whose certificate reports no oxidation finding has not looked for the main impurity. Prices are per kit at the time of writing and are confirmed on the product page. Larger fills and export documentation are quoted through bulk research peptides.
Related reading on MOTS-c
Need the oxidation finding on the certificate?
Send the fill you are evaluating. We return the deconvoluted mass, the oxidation finding and the certificate for that lot.
